ResMed Lumis 150 ST BiPAP rental in Delhi NCR: ₹7,100 for one month, ₹30,000 refundable security deposit and ₹750 payable one-time delivery-and-pickup transport. The first payment with an online deposit is ₹37,850, before separately ordered accessories or eligible offers. The six-month plan is ₹5,680/month; it is a six-month commitment, not the one-month rate. Purchase is also available at ₹77,000.
Rental prices include GST. With a security cheque, pay rent plus payable transport online and provide the deposit-value cheque at delivery. Transport is waived for three- and six-month bookings; confirm the final quotation and included package before payment.
Compare BiPAP models and prices. Equipment must match the clinician’s prescription; patient-specific masks or cannulas and optional accessories are separate unless expressly included.
ResMed Lumis 150 ST What’s Included
When is the ResMed Lumis 150 VPAP ST used?
The ResMed Lumis 150 VPAP ST provides prescribed non-invasive bilevel ventilatory support for patients who require pressure support, a backup respiratory rate or volume-assured ventilation.The exact mode, pressures, backup rate and other settings must be prescribed and configured by a qualified clinician. This device is not an oxygen source and does not replace prescribed supplemental oxygen.*Product images are for representational purposes only; actual equipment supplied may vary.*Use the respiratory mode and settings stated in the prescription. Compare our respiratory-care range, including the BiPAP – ST Mode – BMC / Deckmount and BiPAP – ResMed Lumis ST-A, when the prescribed S, ST or volume-assured mode differs.If you are unsure which type was prescribed, read our BiPAP vs CPAP vs ventilator guide.
| Specification | Details |
|---|---|
| Manufacturer | ResMed |
| Exact product | Lumis 150 VPAP ST |
| Device type | Non-life-support, non-invasive pressure-support ventilator |
| Supported modes | CPAP, S, T, ST with optional intelligent backup rate, PAC and iVAPS with intelligent backup rate; AutoEPAP may be available in iVAPS |
| Bilevel pressure range | 2–25 cmH₂O in S, T, ST, PAC and iVAPS modes |
| CPAP pressure range | 4–20 cmH₂O |
| Backup rate | Available in the applicable prescribed modes; clinician configured |
| iVAPS | Supported; intended only for an appropriate prescribed patient and clinician-configured target |
| Interface | Compatible non-vented or vented mask and circuit must match the prescribed setup |
| Humidifier | ResMed HumidAir heated humidifier included |
| Compatible tubing | SlimLine, ClimateLineAir or standard tubing, according to the supplied configuration |
| Supplemental oxygen | The device does not produce oxygen. Separately prescribed oxygen may be connected only through a compatible clinician-approved setup |
| Built-in battery | None |
| Operation during a power cut | The device stops if mains power fails unless a compatible external backup-power solution is connected |
| Power supply | 90 W external power supply |
| AC input | 100–240 V, 50–60 Hz |
| Device dimensions | 116 × 205 × 150 mm |
| Dimensions with humidifier | 116 × 255 × 150 mm |
| Device weight | Approximately 1.1 kg |
| Weight with humidifier | Approximately 1.27 kg |
| Sound-pressure level | Approximately 26.6 ± 2 dBA in the specified CPAP test condition |
| Therapy data | ResScan-supported; AirView availability depends on whether the exact unit has compatible cellular connectivity |
| Life-support suitability | Not a life-support ventilator; not suitable for a patient who cannot tolerate interruption of therapy |
| Setup requirement | Prescribed mode, pressures, backup rate, interface and other settings must be confirmed before handover |
The ResMed Lumis 150 VPAP ST is a non-life-support, non-invasive ventilator for prescribed bilevel respiratory support. It supports CPAP, S, T, ST, PAC and iVAPS modes, with a treatment-pressure range of up to 25 cmH₂O in its bilevel modes.
The device must be supplied only after confirming that the exact model, prescribed mode, pressures, backup rate, interface and humidification setup match the treating clinician’s prescription.
The Lumis 150 ST is not an oxygen concentrator and does not generate oxygen. Supplemental oxygen, when prescribed, requires a separate oxygen source and clinically approved setup.
Every unit goes through our pre-delivery QC protocol before dispatch. The sanitisation sticker photo is sent to you via WhatsApp before our team leaves.
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day)- full refund, free pickup, zero fees.
Shipping
Delivery Timeline
Estimated Delivery: Same day for orders before 4 PM. Emergency delivery within 4 hours for critical equipment.
All sales are final once delivered and confirmed. No refund after delivery.
Wrong product or physical damage on arrival: exchange only, within 48 hours of confirmed delivery. Contact +91 9217910612 or support@sanjeevia.com.
Manufacturer warranty applies- terms vary by brand.
For Rental:
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. Where no deduction is due after pickup and inspection, online security deposits are refunded within 3–5 business days, and security cheques are returned within 48 hours.
Upgrade available during rental contact us for a same-day swap.
For Purchase:
All sales are final. No returns are accepted after delivery confirmation.
For exchange requests (wrong product or damage on arrival only), raise within 48 hours of delivery via call or WhatsApp at +91 9217910612 or by emailing support@sanjeevia.com.
Exchanges are subject to our assessment of the reported issue. We will arrange a replacement at no charge for confirmed wrong deliveries or damage present at arrival.
For full Purchase & Sale Terms including exchange eligibility, see Sanjeevia’s policies.
The ResMed Lumis 150 ST is a non-life-support, non-invasive bilevel ventilation device with prescribed ST backup-rate support. The exact mode, pressures, interface and ventilation targets must match the treating clinician’s prescription.
HumidAir and compatible tubing are supplied. AirView connectivity depends on the exact unit and supported network. There is no built-in battery; compatible external backup power is separate.
The ResMed Lumis 150 ST is a non-life-support, non-invasive bilevel ventilation device with prescribed ST backup-rate support. The exact mode, pressures, interface and ventilation targets must match the treating clinician’s prescription.
HumidAir and compatible tubing are supplied. AirView connectivity depends on the exact unit and supported network. There is no built-in battery; compatible external backup power is separate.
Eligibility is checked at checkout. Transport and refundable security deposits are not discounted.
Enter your mobile number so our team can assist if regular rental delivery is unavailable.
For rentals only. Purchased equipment can be couriered across India.
Finding it hard to choose? Our team can help.
I can connect you to our team. I can’t give medical advice. Not for emergencies. Share only information needed for your enquiry.
Surabhi –
The machine is good, no complaints there. Delivery was fast, and the person explained the settings properly.