ResMed BiPAP Machine
What’s Included
What’s Not Included (customer to purchase/arrange separately)
For hygiene and safety reasons, items that come in direct contact with the patient’s skin are non-returnable and must be procured fresh by the family. We can help you source them if needed.
Prescription configuration required
Lumis ST-A settings must be configured by qualified personnel. Confirm the prescribed mode, IPAP/EPAP or iVAPS targets, backup rate, inspiratory time, interface and alarm limits before delivery. Do not substitute iVAPS for a prescription stating Philips AVAPS without confirmation from the treating clinician.
ResMed BiPAP Machine
When is this device considered?
When the treating clinician specifically prescribes a ResMed Lumis 150 VPAP ST-A or confirms that its available mode, pressure range, backup-rate, alarm and monitoring capabilities match the patient’s non-invasive ventilation prescription.
A prescription mentioning Philips AVAPS does not automatically authorise substitution with ResMed iVAPS. Obtain confirmation from the prescribing team before supplying a different manufacturer’s volume-assurance technology.
*Product images are for representational purposes only; actual equipment supplied may vary.*
Use the respiratory mode and settings stated in the prescription. Compare our respiratory-care range, including the BiPAP – ResMed Lumis 150 ST and BiPAP – Philips DreamStation COPD / AVAPs, when the prescribed S, ST or volume-assured mode differs.
If you are unsure which type was prescribed, read our BiPAP vs CPAP vs ventilator guide.
| Specification | Details |
|---|---|
| Manufacturer | ResMed Pty Ltd |
| Product | Lumis 150 VPAP ST-A |
| Device type | Non-life-support, non-invasive ventilator with alarms |
| Intended patient dependency | Non-dependent patients who can tolerate an interruption in therapy |
| Therapy modes | CPAP, S, T, ST with optional iBR, PAC and iVAPS with iBR and optional AutoEPAP |
| Volume-assurance technology | ResMed iVAPS—intelligent Volume-Assured Pressure Support |
| AVAPS | Not supported; AVAPS is Philips terminology |
| Intelligent Backup Rate | Available in iVAPS and ST modes |
| AutoEPAP | Available as an option in iVAPS mode |
| Bilevel pressure range | 2–30 cmH₂O in S, T, ST, PAC and iVAPS modes |
| CPAP pressure range | 4–20 cmH₂O |
| Synchronisation features | Vsync, TiControl and five trigger/cycle sensitivity levels |
| Alarms | Adjustable high-leak, low-minute-ventilation, apnoea, non-vented-mask and low-SpO₂ alarms; low-SpO₂ alarm requires compatible oximetry |
| Humidifier | ResMed HumidAir heated humidifier included |
| Compatible tubing | SlimLine, ClimateLineAir, ClimateLineAir Oxy or standard tubing according to the supplied configuration |
| Mask/interface | Compatible patient-specific non-invasive interface selected according to the prescription |
| Mask and headgear | Purchased separately unless expressly stated in the order |
| Therapy data | ResScan supported |
| AirView connectivity | Depends on the exact REF, installed cellular module and supported network |
| Built-in battery | None |
| Power-cut operation | Requires a separate compatible backup-power solution if uninterrupted therapy is necessary |
| Power supply | 90 W external power supply |
| AC input | 100–240 V, 50–60 Hz |
| Typical power consumption | Approximately 57 VA |
| Peak power consumption | Approximately 108 VA |
| Dimensions—device only | 116 × 205 × 150 mm |
| Dimensions with HumidAir | 116 × 255 × 150 mm |
| Weight—device only | Approximately 1.238 kg |
| Weight with HumidAir | Approximately 1.336 kg |
| Sound-pressure level | Approximately 27 ± 2 dBA under the specified CPAP test condition |
| Air outlet | Standard 22 mm |
| Operating temperature | 5°C to 35°C |
| Operating humidity | 10–95% relative humidity, non-condensing |
| Included | Lumis 150 VPAP ST-A device, HumidAir humidifier, power supply, compatible tubing, clean filter and handover card |
| Setup requirement | Clinician-prescribed mode, pressures, backup rate, target ventilation, interface and alarm limits must be confirmed before use |
This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part, contact us for all servicing.
Every unit goes through our pre-delivery QC protocol before dispatch. The sanitisation sticker photo is sent to you via WhatsApp before our team leaves.
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available, see Section 5d.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day)- full refund, free pickup, zero fees.
Read our Cancellation & Refund Policy
Shipping
Delivery Timeline
Estimated Delivery: Same day for orders before 4:00 PM. Emergency delivery within 4 hours for critical equipment.
All sales are final once delivered and confirmed. No refund after delivery.
Wrong product or physical damage on arrival: exchange only, within 48 hours of confirmed delivery. Contact +91 9217910612 or support@sanjeevia.com.
Manufacturer warranty applies- terms vary by brand.
For Rental:
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. No damage = full deposit refunded within 48 hours.
Upgrade available during rental contact us for a same-day swap.
For Purchase:
All sales are final. No returns are accepted after delivery confirmation.
For exchange requests (wrong product or damage on arrival only), raise within 48 hours of delivery via call or WhatsApp at +91 9217910612 or by emailing support@sanjeevia.com.
Exchanges are subject to our assessment of the reported issue. We will arrange a replacement at no charge for confirmed wrong deliveries or damage present at arrival.
For full Purchase & Sale Terms including exchange eligibility, see Sanjeevia’s policies.
The ResMed Lumis 150 VPAP ST-A is a non-life-support, non-invasive ventilator with fixed and adjustable alarms for non-dependent patients. It supports CPAP, S, T, ST, PAC and ResMed iVAPS modes.
iVAPS—intelligent Volume-Assured Pressure Support—adjusts pressure support to maintain a clinician-configured target for alveolar ventilation. Intelligent Backup Rate is available in iVAPS and ST modes, while optional AutoEPAP is available in iVAPS mode.
The prescribed mode, pressures, backup rate, ventilation target, interface and alarm limits must be configured by qualified personnel. Philips AVAPS and ResMed iVAPS are different technologies and must not be substituted without confirmation from the prescribing clinician.
Enter your mobile number so our team can assist if regular rental delivery is unavailable.
For rentals only. Purchased equipment can be couriered across India.
| Specification | Details |
|---|---|
| Manufacturer | ResMed Pty Ltd |
| Product | Lumis 150 VPAP ST-A |
| Device type | Non-life-support, non-invasive ventilator with alarms |
| Intended patient dependency | Non-dependent patients who can tolerate an interruption in therapy |
| Therapy modes | CPAP, S, T, ST with optional iBR, PAC and iVAPS with iBR and optional AutoEPAP |
| Volume-assurance technology | ResMed iVAPS—intelligent Volume-Assured Pressure Support |
| AVAPS | Not supported; AVAPS is Philips terminology |
| Intelligent Backup Rate | Available in iVAPS and ST modes |
| AutoEPAP | Available as an option in iVAPS mode |
| Bilevel pressure range | 2–30 cmH₂O in S, T, ST, PAC and iVAPS modes |
| CPAP pressure range | 4–20 cmH₂O |
| Synchronisation features | Vsync, TiControl and five trigger/cycle sensitivity levels |
| Alarms | Adjustable high-leak, low-minute-ventilation, apnoea, non-vented-mask and low-SpO₂ alarms; low-SpO₂ alarm requires compatible oximetry |
| Humidifier | ResMed HumidAir heated humidifier included |
| Compatible tubing | SlimLine, ClimateLineAir, ClimateLineAir Oxy or standard tubing according to the supplied configuration |
| Mask/interface | Compatible patient-specific non-invasive interface selected according to the prescription |
| Mask and headgear | Purchased separately unless expressly stated in the order |
| Therapy data | ResScan supported |
| AirView connectivity | Depends on the exact REF, installed cellular module and supported network |
| Built-in battery | None |
| Power-cut operation | Requires a separate compatible backup-power solution if uninterrupted therapy is necessary |
| Power supply | 90 W external power supply |
| AC input | 100–240 V, 50–60 Hz |
| Typical power consumption | Approximately 57 VA |
| Peak power consumption | Approximately 108 VA |
| Dimensions—device only | 116 × 205 × 150 mm |
| Dimensions with HumidAir | 116 × 255 × 150 mm |
| Weight—device only | Approximately 1.238 kg |
| Weight with HumidAir | Approximately 1.336 kg |
| Sound-pressure level | Approximately 27 ± 2 dBA under the specified CPAP test condition |
| Air outlet | Standard 22 mm |
| Operating temperature | 5°C to 35°C |
| Operating humidity | 10–95% relative humidity, non-condensing |
| Included | Lumis 150 VPAP ST-A device, HumidAir humidifier, power supply, compatible tubing, clean filter and handover card |
| Setup requirement | Clinician-prescribed mode, pressures, backup rate, target ventilation, interface and alarm limits must be confirmed before use |
This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part, contact us for all servicing.
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available — see Section 5d.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day) — full refund, free pickup, zero fees.
Transport charge: ₹3,000 (one-time, delivery and pickup).
Pre-delivery call to confirm room access, floor, lift availability, and power socket location. This bed is heavy — our team handles all assembly.
Same-day delivery for orders before 2 PM.
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. No damage = full deposit refunded within 48 hours.
Upgrade available during rental — contact us for a same-day swap.
Tushar Goyal –
Clean, well-maintained device with simple controls. The support team was responsive whenever we had questions.
Palak –
Delivery was on time, and the technician helped us with the setup. My father adapted to the machine within a couple of days.
Karan –
Rented the ResMed Lumis ST-A for my uncle in Gurgaon after his doctor recommended advanced BiPAP support. The machine was very comfortable to use, quiet during the night, and helped stabilise his breathing from the first few days. Since we only needed it for a few months during recovery, renting made much more sense than buying, would recommend.