Nidek Nuvo Lite 5L
What’s Included
What’s Not Included (customer to purchase/arrange separately)
For hygiene and safety reasons, items that come in direct contact with the patient’s skin are non-returnable and must be procured fresh by the family. We can help you source them if needed.
Nidek Nuvo Lite 5L
When may this concentrator be appropriate?
The Nidek Nuvo Lite 925 may be appropriate when a qualified clinician has prescribed continuous-flow supplemental oxygen within its 0.125–5 LPM operating range.
Before ordering, confirm:
• Prescribed oxygen flow rate
• Required hours of daily use
• Target oxygen-saturation range
• Whether oxygen is required during sleep or activity
• Required patient interface and tubing length
• Backup oxygen and power-failure arrangements
• The escalation plan for symptoms, low saturation or equipment alarms
Do not start, stop or change oxygen therapy solely because of a diagnosis or a single pulse-oximeter reading.
*Product images are for representational purposes only; actual equipment supplied may vary.*
Use the oxygen flow rate prescribed by the treating clinician. Compare our home oxygen-support range, including the Oxygen Concentrator – Philips EverFlo 5L and Oxygen Concentrator – 10L Niscomed/Medoxy, when planning the primary device or a backup arrangement.
Before choosing equipment, read our home oxygen flow-rate guide.
| Specification | Details |
|---|---|
| Product name | Nidek Mark 5 Nuvo Lite Oxygen Concentrator |
| Model | 925 |
| Legal manufacturer | Nidek Medical Products, Inc. |
| Manufacturer location | Birmingham, Alabama, USA |
| Country of manufacture | As printed on the supplied unit’s technical label |
| Equipment type | Stationary continuous-flow oxygen concentrator |
| Intended use | Prescribed supplemental oxygen for patients with hypoxaemia |
| Life-support classification | Not a life-support device |
| Maximum continuous flow | 5 LPM |
| Adjustable flow range | 0.125–5 LPM |
| Average oxygen concentration at 2 LPM | Greater than 90% |
| Average oxygen concentration at 5 LPM | 87%–95.5% |
| Specification test conditions | 21°C and one atmosphere |
| Flow accuracy | ±10% or 200 mL/min, whichever is greater |
| Maximum-flow variation under back pressure | Within ±10% at 6.9 kPa back pressure |
| Oxygen outlet pressure | 7 psig, approximately 48 kPa |
| Oxygen monitoring | Oxygen Concentration Status Indicator—OCSI |
| Low-oxygen alarm set point | 85% ±3%, factory-set and non-adjustable |
| Power-failure alarm | Intermittent audible alarm; green indicator turns off |
| Blocked-cannula alarm | Only if fitted on the supplied configuration |
| Low-pressure/malfunction warning | Flashing yellow indicator and continuous audible alarm |
| Normal operating indicator | Green indicator |
| Start-up time | Normal operating conditions reached in approximately two minutes |
| Rated electrical supply | 230 V AC, 50 Hz |
| Average power consumption | 300 W |
| Mains circuit protection | 5 A circuit breaker |
| Electrical protection | Class II |
| Liquid-ingress protection | IPX1 |
| Built-in battery | None |
| Noise level | Below 58 dBA |
| Dimensions | 36 × 23 × 58.5 cm |
| Weight | Approximately 14.5 kg; varies with fitted features |
| Operating temperature | 10°C–40°C |
| Operating humidity | 15%–95% relative humidity |
| Standard operating altitude | Up to 2,200 metres at 21°C without stated product degradation |
| Higher-altitude operation | Consult the equipment provider for 2,200–4,000 metres |
| Storage temperature | −20°C to 60°C |
| Storage humidity | 15%–95% relative humidity |
| Oxygen-generation technology | Pressure-swing adsorption |
| Oxygen outlet safety | Metal fire break fitted at the oxygen outlet |
| Humidifier | Compatible 1–5 LPM humidifier; include only if listed in the order |
| Maximum tubing length | 15.5 metres, including extension tubing |
| Cabinet filter care | Wash weekly or after approximately 100 operating hours |
| Inlet-filter replacement | Annually or more frequently when required |
| Oxygen-concentration/OCSI check | Every 15,000 operating hours or three years |
| Expected service life | Ten years with routine preventive and required maintenance |
| Patient maintenance | External cleaning, cabinet-filter care and accessory hygiene |
| Internal servicing | Qualified service personnel only |
| Prescription requirement | Use only at the individually prescribed flow and duration |
| Backup power | No internal backup; arrange an appropriate backup plan if interruption presents a risk |
This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part – contact us for all servicing.
Alarms and power interruption
The Nuvo Lite 925 operates from mains electricity and has no built-in battery.
A yellow indicator and continuous alarm can indicate oxygen concentration below the factory-set OCSI threshold of 85% ±3%. A flashing yellow indicator with a continuous alarm may indicate low pressure or another malfunction.
If an alarm persists, switch the unit off, use the prescribed backup oxygen arrangement and contact Sanjeevia. Do not continue relying on an alarmed unit until it has been checked.
Patients who cannot safely tolerate interruption require an appropriate backup plan established with the treating care team.
Owner maintenance
Technical maintenance
Every unit goes through our pre-delivery QC protocol before dispatch. The sanitisation sticker photo is sent to you via WhatsApp before our team leaves.
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available, see Section 5d.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day)- full refund, free pickup, zero fees.
Read our Cancellation & Refund Policy
Shipping
Delivery Timeline
Estimated Delivery: Same day for orders before 4:00 PM. Emergency delivery within 4 hours for critical equipment.
All sales are final once delivered and confirmed. No refund after delivery.
Wrong product or physical damage on arrival: exchange only, within 48 hours of confirmed delivery. Contact +91 9217910612 or support@sanjeevia.com.
Manufacturer warranty applies- terms vary by brand.
For Rental:
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. No damage = full deposit refunded within 48 hours.
Upgrade available during rental contact us for a same-day swap.
For Purchase:
All sales are final. No returns are accepted after delivery confirmation.
For exchange requests (wrong product or damage on arrival only), raise within 48 hours of delivery via call or WhatsApp at +91 9217910612 or by emailing support@sanjeevia.com.
Exchanges are subject to our assessment of the reported issue. We will arrange a replacement at no charge for confirmed wrong deliveries or damage present at arrival.
For full Purchase & Sale Terms including exchange eligibility, see Sanjeevia’s policies.
The Nidek Mark 5 Nuvo Lite 925 is a 230 V stationary oxygen concentrator providing adjustable continuous flow from 0.125 to 5 litres per minute.
At 5 LPM, the manufacturer specifies an average oxygen concentration of 87% to 95.5% under reference conditions of 21°C and one atmosphere. Performance can vary with temperature, altitude and equipment condition.
Use supplemental oxygen only as prescribed. Confirm the required flow rate, duration, target oxygen-saturation range and backup plan with the treating clinician.
The Nidek Mark 5 Nuvo Lite 925 is a 230 V stationary oxygen concentrator providing adjustable continuous flow from 0.125 to 5 litres per minute.
At 5 LPM, the manufacturer specifies an average oxygen concentration of 87% to 95.5% under reference conditions of 21°C and one atmosphere. Performance can vary with temperature, altitude and equipment condition.
Use supplemental oxygen only as prescribed. Confirm the required flow rate, duration, target oxygen-saturation range and backup plan with the treating clinician.
| Specification | Details |
|---|---|
| Product name | Nidek Mark 5 Nuvo Lite Oxygen Concentrator |
| Model | 925 |
| Legal manufacturer | Nidek Medical Products, Inc. |
| Manufacturer location | Birmingham, Alabama, USA |
| Country of manufacture | As printed on the supplied unit’s technical label |
| Equipment type | Stationary continuous-flow oxygen concentrator |
| Intended use | Prescribed supplemental oxygen for patients with hypoxaemia |
| Life-support classification | Not a life-support device |
| Maximum continuous flow | 5 LPM |
| Adjustable flow range | 0.125–5 LPM |
| Average oxygen concentration at 2 LPM | Greater than 90% |
| Average oxygen concentration at 5 LPM | 87%–95.5% |
| Specification test conditions | 21°C and one atmosphere |
| Flow accuracy | ±10% or 200 mL/min, whichever is greater |
| Maximum-flow variation under back pressure | Within ±10% at 6.9 kPa back pressure |
| Oxygen outlet pressure | 7 psig, approximately 48 kPa |
| Oxygen monitoring | Oxygen Concentration Status Indicator—OCSI |
| Low-oxygen alarm set point | 85% ±3%, factory-set and non-adjustable |
| Power-failure alarm | Intermittent audible alarm; green indicator turns off |
| Blocked-cannula alarm | Only if fitted on the supplied configuration |
| Low-pressure/malfunction warning | Flashing yellow indicator and continuous audible alarm |
| Normal operating indicator | Green indicator |
| Start-up time | Normal operating conditions reached in approximately two minutes |
| Rated electrical supply | 230 V AC, 50 Hz |
| Average power consumption | 300 W |
| Mains circuit protection | 5 A circuit breaker |
| Electrical protection | Class II |
| Liquid-ingress protection | IPX1 |
| Built-in battery | None |
| Noise level | Below 58 dBA |
| Dimensions | 36 × 23 × 58.5 cm |
| Weight | Approximately 14.5 kg; varies with fitted features |
| Operating temperature | 10°C–40°C |
| Operating humidity | 15%–95% relative humidity |
| Standard operating altitude | Up to 2,200 metres at 21°C without stated product degradation |
| Higher-altitude operation | Consult the equipment provider for 2,200–4,000 metres |
| Storage temperature | −20°C to 60°C |
| Storage humidity | 15%–95% relative humidity |
| Oxygen-generation technology | Pressure-swing adsorption |
| Oxygen outlet safety | Metal fire break fitted at the oxygen outlet |
| Humidifier | Compatible 1–5 LPM humidifier; include only if listed in the order |
| Maximum tubing length | 15.5 metres, including extension tubing |
| Cabinet filter care | Wash weekly or after approximately 100 operating hours |
| Inlet-filter replacement | Annually or more frequently when required |
| Oxygen-concentration/OCSI check | Every 15,000 operating hours or three years |
| Expected service life | Ten years with routine preventive and required maintenance |
| Patient maintenance | External cleaning, cabinet-filter care and accessory hygiene |
| Internal servicing | Qualified service personnel only |
| Prescription requirement | Use only at the individually prescribed flow and duration |
| Backup power | No internal backup; arrange an appropriate backup plan if interruption presents a risk |
This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part – contact us for all servicing.
Alarms and power interruption
The Nuvo Lite 925 operates from mains electricity and has no built-in battery.
A yellow indicator and continuous alarm can indicate oxygen concentration below the factory-set OCSI threshold of 85% ±3%. A flashing yellow indicator with a continuous alarm may indicate low pressure or another malfunction.
If an alarm persists, switch the unit off, use the prescribed backup oxygen arrangement and contact Sanjeevia. Do not continue relying on an alarmed unit until it has been checked.
Patients who cannot safely tolerate interruption require an appropriate backup plan established with the treating care team.
Owner maintenance
Technical maintenance
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available — see Section 5d.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day) — full refund, free pickup, zero fees.
Transport charge: ₹3,000 (one-time, delivery and pickup).
Pre-delivery call to confirm room access, floor, lift availability, and power socket location. This bed is heavy — our team handles all assembly.
Same-day delivery for orders before 2 PM.
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. No damage = full deposit refunded within 48 hours.
Upgrade available during rental — contact us for a same-day swap.
The Deck Mount Respirare VT30 D is an auto-adjusting positive-airway-pressure device for prescribed obstructive sleep apnoea therapy. It supports fixed-pressure CPAP and Auto CPAP modes within a clinician-set pressure range of 4–20 cmH₂O.
Comfort features include automatic ramp, A-Flex expiratory pressure relief, automatic start/stop, leak compensation and compatibility with a heated humidifier. The prescribed mode, minimum and maximum pressures, mask and humidification requirements should be confirmed before use.
Manufacturer: Deck Mount Electronics Pvt. Ltd.
Model: Respirare VT30 D
Warranty: Two-year manufacturer warranty, subject to the supplied warranty card and terms.
A two-wheel trolley for securing and moving a compatible large medical-oxygen cylinder. The cylinder remains upright on the trolley base during storage and is moved by carefully tilting the trolley backwards onto its two wheels.
Secure the cylinder using the supplied upper chain and body strap before movement. Cylinder compatibility is confirmed from its height and maximum body diameter before dispatch. Oxygen cylinder and gas are not included.
OXYGEN CYLINDER NOT INCLUDED
This is a two-wheel trolley without brakes. Before dispatch, Sanjeevia confirms that the customer’s cylinder sits fully inside the trolley base and can be secured.
A compact two-wheel trolley for securing and moving a compatible small medical-oxygen cylinder. The cylinder remains upright on the trolley base during storage and is moved by carefully tilting the trolley backwards onto its two wheels.
The cylinder must sit fully inside the base support and be secured before movement. Oxygen cylinder and gas are not included.
OXYGEN CYLINDER NOT INCLUDED
This product is a two-wheel trolley without brakes. It is supplied only after confirming that the customer’s cylinder fits fully inside the base support and can be secured without obstructing the cylinder valve or regulator.
The Nidek Mark 5 Nuvo Lite 925 is a 230 V stationary oxygen concentrator providing adjustable continuous flow from 0.125 to 5 litres per minute.
At 5 LPM, the manufacturer specifies an average oxygen concentration of 87% to 95.5% under reference conditions of 21°C and one atmosphere. Performance can vary with temperature, altitude and equipment condition.
Use supplemental oxygen only as prescribed. Confirm the required flow rate, duration, target oxygen-saturation range and backup plan with the treating clinician.
A three-panel mobile privacy screen with an opaque, cleanable curtain and hinged metal frame. Each panel is approximately 55 cm wide, providing a nominal expanded size of 165 × 180 cm and a folded width of approximately 55 cm.
Designed to provide visual privacy beside a bed or examination area. Position the three panels in a shallow zigzag arrangement for stability. This screen is not a support rail, room-security barrier or soundproof partition.
A 4-panel fabric curtain divider on a wheeled frame for creating privacy around the patient’s bed. Hospital-standard design used to divide a room, create a private care area during dressing changes, or provide visual separation when multiple patients are in the same space.
Reviews
There are no reviews yet.