Current price and availability

ResMed AirCurve 10 VAuto auto-adjusting BiPAP rental in Delhi NCR: ₹7,100 for one month, ₹18,000 refundable security deposit and ₹750 payable one-time delivery-and-pickup transport. The first payment with an online deposit is ₹25,850, before separately ordered accessories or eligible offers. The six-month plan is ₹5,680/month; it is a six-month commitment, not the one-month rate. Purchase is also available at ₹63,500.

Rental prices include GST. With a security cheque, pay rent plus payable transport online and provide the deposit-value cheque at delivery. Transport is waived for three- and six-month bookings; confirm the final quotation and included package before payment.

Compare BiPAP models and prices. Equipment must match the clinician’s prescription; patient-specific masks or cannulas and optional accessories are separate unless expressly included.

AirCurve 10 VAuto: auto-adjusting bilevel, S and CPAP modes

This is a ResMed AirCurve 10 VAuto bilevel device. It provides separate inspiratory and expiratory pressures in its bilevel modes. It is different from AirSense 10 AutoSet APAP. It has no timed backup breathing rate and must not replace an ST, ASV, AVAPS or iVAPS prescription.

What is included

  • ResMed AirCurve 10 VAuto unit
  • Compatible power supply
  • HumidAir humidifier and water tub
  • Compatible tubing and handover card

What is separate

A patient-specific mask, headgear, distilled water, replacement consumables and compatible external backup power are separate unless stated in the order. Connectivity depends on the supplied unit and supported network; no myAir or remote-monitoring service is promised.

Prescription and setup

Confirm the prescribed mode, pressure support, IPAP/EPAP limits, compatible interface and humidification requirements before delivery. Qualified personnel configure clinical settings from the prescription. Read our BiPAP vs CPAP guide and compare the Lumis 150 ST listing if a timed backup mode was prescribed; devices are not interchangeable without clinician approval.

Device information: ResMed AirCurve 10 VAuto support.

Product images: manufacturer photographs show the ResMed AirCurve 10 VAuto. Confirm the exact supplied unit, accessories and configuration before booking. Image source: ResMed AirCurve 10 VAuto.

SpecificationCorrect information
ManufacturerResMed
ProductAirCurve 10 VAuto
Device typeAuto-adjusting bilevel positive-airway-pressure device
Therapy modesVAuto, S and CPAP
VAuto operating pressure4–25 cmH₂O
S-mode operating pressure3–25 cmH₂O
CPAP operating pressure4–20 cmH₂O
Pressure supportSet by the treating clinician
Backup breathing rateNone
Synchronisation featureVsync
Breath timing controlsTiControl
Comfort waveformEasy-Breathe
HumidifierIntegrated HumidAir heated humidifier
Water-tub capacity380 mL
Compatible tubingResMed SlimLine or ClimateLineAir
Therapy dataSD-card recording; wireless/AirView availability depends on the exact communication module and supported local network
Power supply90 W; input 100–240 V AC, 50–60 Hz
Dimensions116 × 255 × 150 mm
WeightApproximately 1.25 kg with water tub
Built-in batteryNone
Backup powerCompatible external backup-power equipment must be arranged separately
MaskNot included unless specifically stated in the order
Timed ST modeNo
AVAPS/iVAPSNo
Life-support ventilatorNo

This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part, contact us for all servicing.

  • Use distilled water only in the HumidAir humidifier.
  • Replace disposable filters monthly.
  • Regularly review myAir app for therapy compliance and leak data.
  • Contact Sanjeevia or your physician if AHI is consistently above 5.

Every unit goes through our pre-delivery QC protocol before dispatch. The sanitisation sticker photo is sent to you via WhatsApp before our team leaves.

  • Auto-titration algorithm tested
  • Pressure range verified (4–25 cm)
  • Connectivity checked only when supported by the assigned unit
  • HumidAir chamber cleaned
  • Filter replaced
  • Tubing inspected
  • Sanitisation. Sticker. Photo sent.

Before dispatch: Full refund instantly.

After dispatch, before delivery: Full refund minus logistics charges already incurred.

After delivery: No cancellation refund. Early return available.

Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day)- full refund, free pickup, zero fees.

Read our Cancellation & Refund Policy

Shipping

  • Same-day delivery for orders placed before 4 PM. Emergency delivery within 4 hours for critical equipment.
  • Installation, and full demo included at no extra charge.
  • Transport is a one-time charge covering both delivery and pickup.
  • Transport charges are shown on the product page and at checkout.

Delivery Timeline

  • Order placed online or via WhatsApp- Order ID generated and confirmation sent via WhatsApp, SMS, and email.
  • Equipment assigned from nearest team within 30–60 minutes.
  • Full quality check and deep sanitisation performed. Sanitisation sticker photo sent to you via WhatsApp before dispatch.
  • Pre-delivery call made 1–2 hours before arrival to confirm address, floor, lift access, and room readiness.
  • Our team arrives in Sanjeevia identification. Valid government-issued ID (Aadhaar, PAN, driving licence, or passport) collected from customer. Equipment installed and fully tested. Complete demo given to patient and caregiver.
  • Security cheque collected at delivery (if cheque deposit selected)- before installation begins.
  • You confirm satisfactory delivery via WhatsApp. Rental period starts from this confirmation.

Estimated Delivery: Same day for orders before 4 PM. Emergency delivery within 4 hours for critical equipment.

All sales are final once delivered and confirmed. No refund after delivery.

Wrong product or physical damage on arrival: exchange only, within 48 hours of confirmed delivery. Contact +91 9217910612 or support@sanjeevia.com.

Manufacturer warranty applies- terms vary by brand.

Read our Purchase & Sales Terms

For Rental: 
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.

Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.

Condition inspected at pickup against delivery photos. Where no deduction is due after pickup and inspection, online security deposits are refunded within 3–5 business days, and security cheques are returned within 48 hours.

Upgrade available during rental contact us for a same-day swap.

For Purchase:

All sales are final. No returns are accepted after delivery confirmation.

For exchange requests (wrong product or damage on arrival only), raise within 48 hours of delivery via call or WhatsApp at +91 9217910612 or by emailing support@sanjeevia.com.

Exchanges are subject to our assessment of the reported issue. We will arrange a replacement at no charge for confirmed wrong deliveries or damage present at arrival.

For full Purchase & Sale Terms including exchange eligibility, see Sanjeevia’s policies.

Read our Return & Pickup Policy

ResMed AirCurve 10 VAuto Auto-BiPAP Device

The ResMed AirCurve 10 VAuto is an auto-adjusting BiPAP device for patients who have been prescribed separate inspiratory and expiratory pressure support. In VAuto mode, the device adjusts expiratory pressure within the clinician-set range while maintaining the prescribed pressure support.

It also provides spontaneous bilevel and fixed CPAP modes. It does not provide a timed backup breathing rate and must not be substituted for an ST, ASV, AVAPS or iVAPS prescription.

Auto-Adjusting Bilevel
VAuto, S and CPAP Modes
Up to 25 cmH₂O
Vsync
TiControl

The ResMed AirCurve 10 VAuto is an auto-adjusting BiPAP device for patients who have been prescribed separate inspiratory and expiratory pressure support. In VAuto mode, the device adjusts expiratory pressure within the clinician-set range while maintaining the prescribed pressure support.

It also provides spontaneous bilevel and fixed CPAP modes. It does not provide a timed backup breathing rate and must not be substituted for an ST, ASV, AVAPS or iVAPS prescription.

FIRST ORDER OFFER 10% off if eligible
Use FIRSTBUY at checkout Your exact eligible saving will be confirmed at checkout.

Eligibility is checked at checkout. Transport and refundable security deposits are not discounted.

SECTION 8 • PRICE & DEPOSIT

Buy this product outright at the purchase price below.

Purchase price
MRP ₹76,000.00
₹63,500.00
Transport As per actuals
Total (excl. taxes) ₹63,500.00

All displayed prices are inclusive of applicable GST. Transport is billed separately as per actuals.

Select rental duration:
₹8,500.00 ₹7,100.00 /month
Total rental ₹7,100.00
Transport (one-time) ₹750.00
Security deposit ₹18,000.00
Total (excl. deposit) ₹7,850.00
Security Deposit payment method:
Security deposit ₹18,000.00
Refundable subject to inspection: online deposits within 3–5 business days; security cheques within 48 hours after pickup and inspection, where no deduction is due.

For rentals only. Purchased equipment can be couriered across India.

🔄 Easy Return Pickup
📞 24/7 Support
🔄 Easy Return Pickup
📞 24/7 Support

Need equipment for longer?

Contact us for a custom plan.

Enquire Now →

Reviews

There are no reviews yet.

Be the first to review “ResMed AirCurve 10 VAuto Auto-BiPAP Device”

Your email address will not be published. Required fields are marked *

Patients Who Ordered This Also Needed

Frequently Asked
Questions

Have more questions? Our care team is
available around the clock to assist you.
AirSense 10 AutoSet provides one continuous airway pressure that automatically changes within a prescribed range. AirCurve 10 VAuto provides separate inspiratory and expiratory pressures, creating clinician-set pressure support. AirCurve should be selected only when bilevel therapy has been prescribed.