47L Medical Oxygen Cylinder
What’s Included
What’s Not Included (customer to purchase/arrange separately)
Cylinder with medical oxygen only. Regulator, gauge, flowmeter, trolley, tubing and patient interface are not included. A compatible D-type trolley or securing stand is required.
For hygiene and safety reasons, items that come in direct contact with the patient’s skin are non-returnable and must be procured fresh by the family. We can help you source them if needed.
Keep the cylinder upright and secured in a compatible D-type trolley or stand at all times.
Never leave the cylinder free-standing. Do not drag it, roll it on its side, drop it or attempt to carry it manually.
Protect the valve from impact. Never lift or move the cylinder by its valve, cap, regulator or flowmeter.
Keep the cylinder away from smoking, flames, sparks, cooking equipment, heaters and other heat sources.
Never apply oil, grease, petroleum jelly or oil-based products to the valve, regulator, flowmeter or oxygen fittings.
Store and use the cylinder in a ventilated area. Do not place it in a closed cupboard or unventilated enclosure.
Use only a compatible medical-oxygen regulator and flowmeter. Never force incompatible fittings together.
Open the valve slowly while standing to the side of the regulator.
Close the cylinder valve when oxygen is not being used.
Do not attempt to refill the cylinder or transfer oxygen between cylinders at home.
Arrange replacement or refill before the contents gauge reaches the 20-bar reserve.
When Do You Need This?
Primary backup for continuous oxygen therapy (concentrator patients); patients in areas with frequent or extended power cuts; any clinical situation where uninterrupted oxygen supply is critical.
*Product images are for representational purposes only; actual equipment supplied may vary.*
Use the oxygen flow rate prescribed by the treating clinician. Compare our home oxygen-support range, including the Oxygen Cylinder Refilling and Oxygen Cylinder Trolley (Large Cylinder Compatible), when planning the primary device or a backup arrangement.
Before choosing equipment, read our oxygen cylinder versus concentrator guide.
| Specification | Details |
|---|---|
| Product type | High-pressure medical oxygen cylinder |
| Cylinder category | D-type |
| Gas | Medical oxygen |
| Cylinder construction | High-pressure seamless steel cylinder |
| Water capacity | Approximately 47 litres |
| Meaning of 47L | Internal cylinder volume—not usable oxygen quantity |
| Nominal full pressure | 150 bar |
| Maximum working pressure | 150 bar |
| Hydrostatic test pressure | 250 bar |
| Nominal oxygen-holding capacity | Approximately 7 m³ or 7,000 litres |
| Planning reserve | 20 bar |
| Estimated oxygen available from 150 to 20 bar | Approximately 6,110 litres |
| Approximate diameter | 232 mm |
| Approximate length | 1,370 mm |
| Approximate tare weight | 50 kg |
| Valve type | Medical-oxygen-compatible bull-nose valve |
| Valve standard | IS 3224-compatible |
| Cylinder standard | IS 7285 Part 2-compatible D-type cylinder |
| Neck ring | Present |
| Power requirement | None |
| Built-in flow control | None |
| Pressure regulator | Not included |
| Cylinder-pressure gauge | Not included |
| Flowmeter | Not included |
| Cylinder trolley | Not included |
| Securing stand | Not included |
| Humidifier bottle | Not included |
| Oxygen tubing | Not included |
| Nasal cannula | Not included |
| Oxygen mask | Not included |
| Medical oxygen fill | Included |
| Transport position | Upright and secured on a compatible D-type trolley |
| Storage position | Upright and secured in a compatible stand or trolley |
| Hydrostatic-test validity | Checked before release |
| Valve/leak inspection | Completed before release |
| Intended use | Prescribed supplemental oxygen or backup oxygen |
| Runtime | Calculated using pressure, reserve and prescribed flow |
The estimates below assume:
| Prescribed flow | Estimated planning duration |
|---|---|
| 1 LPM | Approximately 101 hours 50 minutes |
| 2 LPM | Approximately 50 hours 55 minutes |
| 3 LPM | Approximately 33 hours 57 minutes |
| 4 LPM | Approximately 25 hours 28 minutes |
| 5 LPM | Approximately 20 hours 22 minutes |
| 10 LPM | Approximately 10 hours 11 minutes |
| 15 LPM | Approximately 6 hours 47 minutes |
This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part, contact us for all servicing.
Every unit goes through our pre-delivery QC protocol before dispatch. The sanitisation sticker photo is sent to you via WhatsApp before our team leaves.
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available, see Section 5d.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day)- full refund, free pickup, zero fees.
Read our Cancellation & Refund Policy
Shipping
Delivery Timeline
Estimated Delivery: Same day for orders before 4:00 PM. Emergency delivery within 4 hours for critical equipment.
All sales are final once delivered and confirmed. No refund after delivery.
Wrong product or physical damage on arrival: exchange only, within 48 hours of confirmed delivery. Contact +91 9217910612 or support@sanjeevia.com.
Manufacturer warranty applies- terms vary by brand.
For Rental:
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. No damage = full deposit refunded within 48 hours.
Upgrade available during rental contact us for a same-day swap.
For Purchase:
All sales are final. No returns are accepted after delivery confirmation.
For exchange requests (wrong product or damage on arrival only), raise within 48 hours of delivery via call or WhatsApp at +91 9217910612 or by emailing support@sanjeevia.com.
Exchanges are subject to our assessment of the reported issue. We will arrange a replacement at no charge for confirmed wrong deliveries or damage present at arrival.
For full Purchase & Sale Terms including exchange eligibility, see Sanjeevia’s policies.
A large-capacity D-type medical oxygen cylinder for prescribed home oxygen use, institutional use and extended backup oxygen planning.
The “47L” designation refers to the cylinder’s internal water capacity—not the quantity of usable oxygen. At a nominal full pressure of 150 bar, a standard 47-litre cylinder holds approximately 7,000 litres of oxygen at atmospheric pressure.
Using a 20-bar planning reserve, approximately 6,110 litres are available for planned use. At 2 LPM, this provides an estimated planning duration of approximately 50 hours 55 minutes—not 18–20 hours.
Actual duration is affected by starting pressure, prescribed flow, regulator performance, leakage and the reserve pressure maintained for safe replacement planning.
Use medical oxygen only at the flow rate and duration prescribed by the treating clinician.
Trolley shown for safe positioning; sold or rented separately.
Enter your mobile number so our team can assist if regular rental delivery is unavailable.
For rentals only. Purchased equipment can be couriered across India.
| Specification | Details |
|---|---|
| Product type | High-pressure medical oxygen cylinder |
| Cylinder category | D-type |
| Gas | Medical oxygen |
| Cylinder construction | High-pressure seamless steel cylinder |
| Water capacity | Approximately 47 litres |
| Meaning of 47L | Internal cylinder volume—not usable oxygen quantity |
| Nominal full pressure | 150 bar |
| Maximum working pressure | 150 bar |
| Hydrostatic test pressure | 250 bar |
| Nominal oxygen-holding capacity | Approximately 7 m³ or 7,000 litres |
| Planning reserve | 20 bar |
| Estimated oxygen available from 150 to 20 bar | Approximately 6,110 litres |
| Approximate diameter | 232 mm |
| Approximate length | 1,370 mm |
| Approximate tare weight | 50 kg |
| Valve type | Medical-oxygen-compatible bull-nose valve |
| Valve standard | IS 3224-compatible |
| Cylinder standard | IS 7285 Part 2-compatible D-type cylinder |
| Neck ring | Present |
| Power requirement | None |
| Built-in flow control | None |
| Pressure regulator | Not included |
| Cylinder-pressure gauge | Not included |
| Flowmeter | Not included |
| Cylinder trolley | Not included |
| Securing stand | Not included |
| Humidifier bottle | Not included |
| Oxygen tubing | Not included |
| Nasal cannula | Not included |
| Oxygen mask | Not included |
| Medical oxygen fill | Included |
| Transport position | Upright and secured on a compatible D-type trolley |
| Storage position | Upright and secured in a compatible stand or trolley |
| Hydrostatic-test validity | Checked before release |
| Valve/leak inspection | Completed before release |
| Intended use | Prescribed supplemental oxygen or backup oxygen |
| Runtime | Calculated using pressure, reserve and prescribed flow |
The estimates below assume:
| Prescribed flow | Estimated planning duration |
|---|---|
| 1 LPM | Approximately 101 hours 50 minutes |
| 2 LPM | Approximately 50 hours 55 minutes |
| 3 LPM | Approximately 33 hours 57 minutes |
| 4 LPM | Approximately 25 hours 28 minutes |
| 5 LPM | Approximately 20 hours 22 minutes |
| 10 LPM | Approximately 10 hours 11 minutes |
| 15 LPM | Approximately 6 hours 47 minutes |
This equipment is for home patient care only. It must remain at the delivery address registered at the time of order. Relocation requires prior approval from Sanjeevia. Do not attempt to repair or modify any part, contact us for all servicing.
Before dispatch: Full refund instantly.
After dispatch, before delivery: Full refund minus logistics charges already incurred.
After delivery: No cancellation refund. Early return available — see Section 5d.
Humanitarian exception: Patient death within 2 days of rental start (excluding delivery day) — full refund, free pickup, zero fees.
Transport charge: ₹3,000 (one-time, delivery and pickup).
Pre-delivery call to confirm room access, floor, lift availability, and power socket location. This bed is heavy — our team handles all assembly.
Same-day delivery for orders before 2 PM.
Initiate return via sanjeevia.com or WhatsApp. Pickup within 4 hours.
Early return: Full duration charged. Refund for each complete remaining month if more than one month remains.
Condition inspected at pickup against delivery photos. No damage = full deposit refunded within 48 hours.
Upgrade available during rental — contact us for a same-day swap.
Reviews
There are no reviews yet.